Troubleshooting
Frequently asked questions (FAQs) about microcomputer products are listed below.
Please click each question to view the answer.
Microcontrollers in General
Functions and Specifications
Quality and Environment
Troubleshooting
-
- During compilation using the Toshiba Integrated Development Environment (TIDE), I get the error message "E-008-0600: Language tools are not exist in specified folder".
(ED9902001 2008/10/31)
Answer » This error message may be caused by the ... - When creating a debug profile, the target cannot be detected properly.
(ED9901901 2008/10/31)
Answer » The possible causes and corresponding wo... - External memory cannot be dumped properly.
(ED9901801 2011/11/09)
Answer » The possible causes and corresponding wo... - I cannot load a program into the emulator.
(ED9901701 2008/10/31)
Answer » The possible cause and workaround are as... - When I compile a program written in C in the Toshiba Integrated Development Environment (TIDE), no assembler source files are output.
(ED9901501 2008/10/31)
Answer » To output assembler source files from a ... - I cannot allocate a program to the desired memory area.
(ED9901401 2011/10/24)
Answer » [1] If absolute addresses are used, the ... - I have set an event breakpoint, but it is not working.
(ED9901301 2008/10/31)
Answer » The possible causes and corresponding wo... - How do I stop the watchdog timer ?
(ED9901201 2011/11/09)
Answer » To stop the watchdog timer, you need to ... - How do I identify whether a malfunction is caused by hardware or software ?
(ED9901101 2008/10/31)
Answer » The answer to this question varies depen... - I have enabled the chip select function, but no memory access can be made.
(ED9901001 2011/10/24)
Answer » In TLCS-900/H1 Series the possible cause... - Although operation checks with test tools in the development environment were successful, proper operation cannot be achieved with the actual device.
(ED9900901 2008/10/31)
Answer » The possible causes and corresponding wo... - In a TLCS-870/C1 Series microcontroller, peripheral functions remain inactive although I have set the relevant SFRs.
(ED9900101 2008/10/31)
Answer » To use peripheral functions in the TLCS-... - In a TLCS-870/C1 Series microcontroller, peripheral functions operate at only quarter of the high-frequency clock speed.
(ED9900201 2008/10/31)
Answer » In the TLCS-870/C1 Series of microcontro... - In a TLCS-870/C1 Series microcontroller, abnormal operation occurs after an interrupt request is accepted.
(ED9900301 2008/10/31)
Answer » The possible causes and corresponding wo... - I cannot find the analog reference voltage pin for AD conversion.
(ED9900401 2008/10/31)
Answer » If the analog reference voltage pin for ... - JEDEC-standard commands have no effect on NOR Flash memory.
(ED9900601 2008/10/31)
Answer » The possible cause and corresponding wor... - Reset conditions occur recurrently.
(ED9900801 2008/10/31)
Answer » The possible causes and corresponding wo...
- During compilation using the Toshiba Integrated Development Environment (TIDE), I get the error message "E-008-0600: Language tools are not exist in specified folder".