Frequently Asked Questions (FAQs)
Frequently asked questions (FAQs) about microcomputer products are listed below.
Please click each question to view the answer.
Microcontrollers in General
Functions and Specifications
Quality and Environment
Functions and Specifications
- Product Specifications / Characteristics
-
- Can I select the stop bit length of the UART ?
(EB9902801 2011/10/24)
Answer » The stop bit length of the UART is selec... - Can I allocate unused SFR space as an address area ?
(EB9901501 2008/10/31)
Answer » No, the SFRs are used to control the mic... - When using a sink open drain pin as an input, why should the output of this pin be set to 1 ?
(EB9901301 2008/10/31)
Answer » When using a sink open drain pin as an i... - What is the interval of time from the instant an interrupt is accepted, until the corresponding interrupt service routine begins to execute ?
(EB9901201 2011/10/24)
Answer » The interval of time from the acceptance... - What is the state of the internal RAM upon power-up ?
(EB9900301 2008/10/31)
Answer » The internal RAM is SRAM. The contents o...
- Can I select the stop bit length of the UART ?