TMPM376FDFG [Under development]
- 32-bit 100-pin TX03 Series
- Microcontrollers with a 512-KB Flash memory, a 32-KB RAM, an I2C bus and hardware called "Vector Engine" for handling routine computations for motor vector control. These high-performance microcontrollers feature single 5-V supply.
- Datasheet (Product Summary is also available.)
Features
- ARM Cortex™-M3 CPU Core
-
- Operating voltage:
4.5 to 5.5 V - Maximum operating frequency:
80 MHz (10 MHz × 8 by PLL) - High-speed computation
Multipliaction (1 to 7 cycles), division (2 to 12 cycles) - On-chip debug circuit
JTAG or 2-pin Serial Wire Debug (SWD) interface - Power saving operation
Clock gear (for dividing clock to 1/2, 1/4 or 1/8)
Standby modes (STOP mode)
- Operating voltage:
- Built-in Functions
-
- Next-generation PMD (motor control timer) : 2 channels
Vector Engine : 1 channel
Encoder input : 2 channels - 12-bit AD converter: 2-µs conversion time, 13-channel and 12-channel ADCs (with three channels sharing the same pins)
- I/O ports : 80 pins
Input ports : 2 pins - 16-bit timer : 8 channels
- SIO/UART : 4 channels
- I2C/SIO : 1 channel
- Power-on reset circuit (POR)
- Voltage detection (VLTD)
- Internal Oscillator (I-OSC)
- Oscillation frequency detector (OFD)
- Next-generation PMD (motor control timer) : 2 channels
| Part number | ROM (Flash) | RAM |
|---|---|---|
| TMPM376FDDFG** | 512 Kbytes | 32 Kbytes |
| TMPM376FDFG** | 512 Kbytes | 32 Kbytes |
- **:Under development
- * ARM and Cortex are trademarks or registered trademarks of ARM Limited in the EU and other countries.
- * NANO FLASH is a trademark of Toshiba Corporation.
Package Information
- Pin Assignments
-
Package FG: LQFP100 (14 × 14 mm)