Brush Motor Drivers
Product Lines
Product Introduction
Full-Bridge DC Motor Driver ICs: TB6641FG, TB6642FG, TB6643KQ
The TB6641FG, TB6642FG and TB6643KQ are full-bridge DC motor drivers with MOS output transistors. The low on-resistance MOS process and PWM control enable driving DC motors with high thermal efficiency. Four operating modes are selectable via the IN1 and IN2 input signals: clockwise (CW), counterclockwise (CCW), Short Brake and Stop.
More »
Full-Bridge DC Motor Driver IC: TB6552FTG
The TB6552FTG in a small QFN16 package (3 mm × 3 mm) is functionally equivalent to the TB6552 low-Ron dual-bridge driver for DC motors. PWM drive provides high thermal efficiency.
More »
Dual-Bridge DC Motor Driver: TB62216FTG/FG/FNG
The TB62216FTG/FG/FNG is a dual DC motor driver with low-Ron DMOS output transistors. The IN1 and IN2 input terminals allow selection of one of the four modes: Forward, Reverse, Short-Circuit Brake or Stop. The TB62216FTG/FG/FNG allows the programming of digital blanking time and supports both constant-current and direct PWM drive.
More »
Full-Bridge DC Motor Driver IC: TB6568KQ/TB6569FG
The TB6568KQ andTB6569FG are DC motor drivers with MOS output transistors. The low-RDS(ON) LDMOS output transistors and the PWM drive method improve thermal efficiency.
More »
TB6552FNG: Dual-Bridge DC Motor Driver
The TB6552FNG ia a dual-bridge DC motor driver with low-RDS(ON) LDMOS output transistors. The IN1 and IN2 input terminals allow selection of one of the four modes: Forward, Reverse, Short-Circuit Brake or Stop. The PWM drive method improves thermal efficiency.
More »
TB9056FNG: Full-Bridge DC Motor Driver with LIN Interface
The TB9056FNG is a full-bridge DC motor driver. Fabricated with a low-ON-resistance MOS process, the TB9056FNG offers a LIN interface for communication and allows selection of one of the four modes, Forward, Reverse, Short-Circuit Brake or Stop. The TB9056FNG helps save energy with a standby leakage current of less than 10 µA.
More »
High-Side Power Switches: TPD1038F、TPD1042F
TPD1038F and TPD1042F are monolithic power IC for high-side switches. The IC has a vertical MOS FET output which can be directly driven from a CMOS or TTL logic circuit (e.g., an MPU). The device offers intelligent self-protection and diagnostic functions.
More »
2-ch High-Side N-ch Power MOSFET Gate Driver: TPD7101F
The TPD7101F is a 2 channel high-side N-ch power MOSFET gate driver. This IC contains a power MOSFET driver and power MOSFET protective and diagnostic functions, allowing easy configuration of a high-side switch for large-current applications.
More »
Power MOSFET Gate Driver for 3-Phase (H-Bridge) Motors: TPD7210F
The TPD7210F is a power MOSFET gate driver for 3-phase full-bridge circuits that use a charge pump system. The inclusion of a charge pump circuit for high-side drive inside the IC makes it easy to configure a 3-phase full-bridge circuit.
More »