Sub Power Management IC for Mobile Equipment: TC7732FTG
The TC7732FTG is a PMIC (power management IC) which accumulated a DCDC converter (one channel) and LDO (three channels). Target application is small electronic devices, such as audiovisual one, office automation, and an amusement.
Sub Power Management IC for Mobile Equipment: TC7732FTG
Offline Isolated Flyback LED Controller with 1 converter PFC: TC62D902FG
This product is an isolated flyback LED controller.The device average LED current is controlled by primary side current and bias side pulse width.The device detection circuit on the secondary side is no need. And, this device has a built-in active one-converter PFC and an active breeder to be effective with the triac dimmable.
Offline Isolated Flyback LED Controller with 1 converter PFC: TC62D902FG
Single Phase Full-wave Driver for Fan Motor： TC78B002FTG
TC78B002FTG is a single phase full-wave driver for fan motor. It has a DMOS device in an output transistor.A highly effective drive is possible by adopting a DMOS output driver with low ON resistance and a PWM drive system.
Single Phase Full-wave Driver for Fan Motor： TC78B002FTG
High-voltage PWM BLDC motor driver:TB67B000HG
The TB67B000HG is a high-voltage PWM BLDC motor driver. The product integrates a sine-wave PWM/wide-angle commutation controller and the high-voltage driver in a single package (two-in-one). It is designed to change the speed of a BLDC directly motor by using a speed control signal (analog) from a microcontroller.
High-voltage PWM BLDC motor driver:TB67B000HG
PWM method CLOCK-IN Bipolar stepping motor driver: TB67S215FTAG
The TB67S215FTAG is a pwm method clock-in controlled motor driver for two-phase bipolar stepping motor. Using the BiCD process, the TB67S215FTAG is rated at 40 V/2.5 A. (Absolute maximum ratings) Also, with the built-in VCC regulator, the TB67S215FTAG can be operated with a single motor power (VM) supply.
PWM method CLOCK-IN Bipolar stepping motor driver: TB67S215FTAG
PWM method PHASE-IN Bipolar stepping motor driver: TB67S213FTAG
The TB67S213FTAG is a pwm method phase signal controlled motor driver for two-phase bipolar stepping motor. Using the BiCD process, the TB67S213FTAG is rated at 40 V / 2.5 A. (Absolute maximum ratings) Also, with the built-in VCC regulator, the TB67S213FTAG can be operated with a single motor power (VM) supply.
PWM method PHASE-IN Bipolar stepping motor driver: TB67S213FTAG
300mA Single Output CMOS-LDO Regulator IC: TCR3DF Series
A general-purpose SMV (SOT-25) package version of 300mA single output CMOS-LDO regulator IC featuring low drop-out, low-noise output, and excellent load response characteristics. Using a next generation process, this regulator IC has a significantly improved trade-off between characteristics and size.
300mA Single Output CMOS-LDO Regulator IC: TCR3DF Series
Expanding Our Lineup of 200mA CMOS-LDO Regulators: TCR2EN, TCR2EE, TCR2EF Series
200mA single output CMOS-LDO regulators featuring low drop-out, low-noise output, and excellent load response characteristics. Using a next generation process, these regulators have a significantly improved trade-off between characteristics and size.
Expanding Our Lineup of 200mA CMOS-LDO Regulators: TCR2EN, TCR2EE, TCR2EF Series
A new window will open.