Camera Bridges (Video Signal Input Bridges)
Camera resolutions are becoming higher. The camera bridge enables high-speed transfer of camera image data.
MIPI® CSI2 to MDDI Camera Bridge / TC358740XBG
Features
- High-speed serial camera input interface: MIPI® CSI2
Two lanes for the primary camera and one lane for the secondary camera - Host interface: MDDI 1.2 Type 2
- 8-bit parallel inputs for the secondary camera
- Supported formats: RAW8/10/12, YUV422
- Primary camera: 8 Mpixels @15 fps (RAW10)
Secondary camera: 2 Mpixels @30 fps (RAW10) - Traditional peripheral interfaces: GPIOs and I2C
General Specifications
| Supply voltages | 1.2 V (Core), 1.2 V & 1.8 V (MDDI I/O), 1.2V (MIPI I/O) 1.8-3.3 V (I/O) |
|---|---|
| Package dimensions | 3.5mm × 3.5mm (49 pins) |
| Status / Availability | Mass Production |
- MIPI® word marks and logos are registered service marks owned by MIPI® Alliance, Inc.
MIPI® CSI2 ⇔ Parallel Interface Camera Bridge / TC358746XBG
Features
- MIPI interface : Compliant with MIPI® CSI2 (Four CSI TX/RX 4 lanes, 1 Gbps/lane)
- Parallel interface : Up to 24 bits (PCLK: Up to 154 MHz in input mode and up to 100 MHz in output mode)
- I2C (slave) interface for internal register access
- Data format:
RGB888/666/565
RAW8/10/12/14
YUV422 (CCIR/ITU 8/10-bit)
YUV444 (Only parallel input mode)
YUV422 8-bit – ITU BT.656 and ITU BT.601 (Only parallel input mode)
General Specifications
| Supply voltages | 1.2 V （Core）, 1.8 V - 3.3 V (I/O), 1.2 V (MIPI® I/O) |
|---|---|
| Package dimensions | 4.5 mm × 4.5 mm (72 pins) |
| Status / Availability | Mass Production |
- MIPI® word marks and logos are registered service marks owned by MIPI® Alliance, Inc.
HDMI to MIPI® CSI2 Video Signal Input Bridge / TC358743XBG
Features
- MIPI interface : Compliant with MIPI® CSI2 (Four CSI TX 4 lanes, 1 Gbps/lane)
- HDMI interface : HDMI 1.4
- Supported video format: Up to 1080p @60 fps
- Audio system support
- 3Ｄ support
- HDCP 1.3
- DDC
- EDID: Up to 24 bits
- Maximum HDMI clock frequency: 165 MHz - Audio output interface : I2S or TMD
- I2C (slave) interface for internal register access
General Specifications
| Supply voltages | 1.2 V （Core）, 1.2 V & 3.3 V (HDMI), 1.2 V (MIPI® I/O) 1.8 V-3.3 V (I/O), 2.5 V (APLL) |
|---|---|
| Package dimensions | 6.0 mm × 6.0 mm (64 pins) |
| Status / Availability | ES Available, Production scheduled to begin in April, 2012 |
- MIPI® word marks and logos are registered service marks owned by MIPI® Alliance, Inc.