Intelligent Power Devices(IPDs)
IPDs are intelligent switches with various protection and diagnostic features and can be directly driven from a microcontroller. They are guaranteed over extended supply voltage and temperature ranges for automotive applications.

High-side switches
Application for a High-Side Switch

IPDs for High-Side Switch Lineup
| Part Number | # of outputs | Ratings | Package | Features | ||||
|---|---|---|---|---|---|---|---|---|
| Supply Voltage | ON-Resistance RDS(ON)max @Tch = 25˚C |
Overcurrent Protection (OCP) |
TSD | Open Load Detection |
Other | |||
| TPD1018F | 1 | 5 to 25 V | 0.8 Ω | SSOP-10 | - | Overvoltage protection (Forces all outputs off.) |
||
| TPD1038F | 1 | 6 to 18 V | 0.12 Ω | SOP-8 | Active clamping | |||
| TPD1042F | 1 | 6 to 18 V | 0.12 Ω/0.18 Ω (Tch=-40 to 115˚C) |
SOP-8 | ||||
| TPD1047F | 1 | 6 to 18 V | 0.25 Ω | SOP-8 | On-chip load current monitor (analog detection) |
|||
| TPD1049F | 1 | 5 to 18 V | 0.08 Ω | SOP Advance |
||||
| TPD1050F | 1 | 5 to 18 V | 0.08 Ω | SOP Advance |
- | Low IDD (10 µA max) | ||
| TPD1051F | 2 | 5 to 18 V | 0.2 Ω | SOP Advance |
2-channel | |||
| TPD1052F | 1 | 5 to 18 V | 0.8 Ω | PS-8 | - | Two OCP options: clamping and maximum duty-cycle control | ||
| TPD1053F(*) | 1 | 5~18 V | 0.12 Ω | SOP-8 | Successor to TPD1038F | |||
(*): Under development
Low-side switches
Application for a Low-Side Switch

IPDs for Low-Side Switch Lineup
| Part Number | # of outputs | Ratings | Package | Features | ||||
|---|---|---|---|---|---|---|---|---|
| Supply Voltage | ON-Resistance RDS(ON)max @Tch = 25˚C |
Overcurrent Protection (OCP) |
TSD | Active clamping |
Other | |||
| TPD1030F | 2 | Up to 40 V | 0.6 Ω | SOP-8 | 2-channel | |||
| TPD1032F | 2 | Up to 20 V | 0.4 Ω | SOP-8 | 2-channel | |||
| TPD1036F | 2 | Up to 30 V | 0.5 Ω | SOP-8 | 2-channel | |||
| TPD1044F | 1 | Up to 41 V | 0.6 Ω | PS-8 | ||||
| TPD1045F | 1 | Up to 18 V | 0.1 Ω | SOP-8 | ||||
| TPD1046F | 2 | Up to 20 V | 0.2 Ω | SOP-8 | 2-channel | |||
| TPD2009F(*) | 6 | Up to 40 V | 0.3 Ω × 2 0.6 Ω × 4 |
QFN36 | Open-load detection and other diagnosis features for SPI I/Os | |||
(*): Under development
Gate drivers
TPD7210F: Three-Phase, Full-Bridge Power MOSFET Gate Drive

TPD7102F: High-Side, Single-Channel Power MOSFET Gate Drive

Gate Drive IPDs Lineup
| Part Number | Function | # of outputs | Ratings | Package | Features | |||
|---|---|---|---|---|---|---|---|---|
| Supply Voltage | Output Current |
Protection | Diagnosis | Other | ||||
| TPD7101F | High-side N-ch power MOSFET gate driver |
2 | 8 to 18 V | ±0.1 A (typ.) |
SSOP-24 | • VDD overvoltage protection • Overcurrent protection (by VDS monitor) |
• VDD1 undervoltage detection • Overcurrent detection • Short-circuit to MOSFET detection |
• On-chip charge pump • The overcurrent detection threshold is programmable via an external resistor. • ENB pin |
| TPD7210F | 3-phase full-bridge N-ch power MOSFET gate driver | 6 | 4.5 to 18 V | ±1 A (max) |
SSOP-24 | • VDD overvoltage protection • Arm-short input prevention |
• VDD undervoltage detection • Arm-short input detection |
• On-chip charge pump • ENB pin • Usable for H bridge system. |
| TPD7102F | High-side N-ch power MOSFET gate driver |
1 | 7 to 18 V | ±100 µA (typ.) |
PS-8 | • VDD overvoltage protection (CP oscillator disabled) |
• VGS undervoltage detection (OUT1-SOURCE monitor) |
• Usable for driving solid state relays. • On-chip charge pump • ENB pin |
| TPD7211F | Half bridge Power MOSFET gate driver (P-ch + N-ch) | 2 | 5 to 18 V | ±0.5 A | PS-8 | • Arm-short input prevention | - | • Charge pump-less (Uses the P-ch MOSFET as a high-side switch.) • Standby (STBY) pin for IDD current reduction |
* Bluetooth® is owned by Bluetooth SIG, Inc. and licensed to Toshiba Corporation.
* System and product names mentioned herein may be trademarks or registered trademarks of respective companies or organizations.





